Datasheet

750-504 / 753-504
1
202
4-Channel Digital Output Module 24 V DC
Short-circuit protected; high-side switching
Fig. 750 Series/Technical data see page 24/Delivered without miniature WSB markers
750/753 Series marking see pages 10 ... 11 / 12 ... 13
DO 2
Data contacts
24 V
DO 4
DO 1
DO 3
Power jumper contacts
0 V
DO 3
DO 1
Status
DO 4
DO 2
Status
13 14
+ +
— —
15
16
13
14
C
D
B
A
750-504
DO 1
0 V
24 V
24 V
270pF
DO
0 V
10nF
10nF
DO
DO 2
DO 3
DO 4
10nF
750-504
1
2
3
4
5
6
7
8
The connected load is switched via the digital output from the control system.
All outputs are electronically short-circuit-protected.
Each output is electrically isolated from the bus by use of optocouplers.
Description
Item No.
Pack.
Unit
4DO 24V DC 0.5A 750-504 1
1)
4DO 24V DC 0.5A/R* 750-504/000-800 1
4DO 24V DC 0.5A/T 750-504/025-000 1
(Operating temperature -20 °C ... +60 °C)
4DO 24V DC 0.5A/T/R* 750-504/025-800 1
(Operating temperature -20 °C ... +60 °C)
4DO 24V DC 0.5A (without connector) 753-504 1
* /R: Interference-free for safety function applications (see manual)
1)
Also available individually
Accessories
Item No.
Pack.
Unit
753 Series Connectors 753-110 25
Coding elements 753-150 100
Miniature WSB Quick marking system
plain 248-501 5
with marking see pages 352 ... 353
Approvals
Also see "Approvals Overview" in Section 1
Conformity marking 1
Shipbuilding (versions upon request) ABS, BV, DNV, GL, KR, LR*, NKK*, PRS*, RINA*
*753 Series, pending
r UL 508
r ANSI/ISA 12.12.01
Class I, Div. 2, Grp. ABCD, T4 75x-504,
750-504/000-800
4 EN 60079-0, -15
EN 61241-0, -1
I M2 / II 3 GD Ex nA IIC T4 75x-504,
750-504/000-800
Technical Data
No. of outputs 4
Current consumption (internal) 10 mA
Voltage via power jumper contacts 24 V DC (-25 % ... +30 %)
Type of load resistive, inductive, lamps
Max. switching frequency 1 kHz
Output current (max.) 0.5 A, short-circuit protected
Inductive load switch off energy
dissipation W (max.) 0.3 J; L max = 2 x W max / I
2
Current consumption typ. (field side) 15 mA / module + charge
Isolation 500 V system/supply
Internal bit width 4 bits
Wire connection CAGE CLAMP
®
Cross sections 0.08 mm² ... 2.5 mm² / AWG 28 ... 14
Stripped lengths, 750/753 Series 8 ... 9 mm / 0.33 in
9 ... 10 mm / 0.37 in
Width 12 mm
Weight 49.5 g
EMC: 1 - immunity to interference acc. to EN 60000-6-2 (2005)
EMC: 1 - emission of interference acc. to EN 61000-6-4 (2007)
EMC: marine applications
- immunity to interference acc. to Germanischer Lloyd (2003)
EMC: marine applications
- emission of interference acc. to Germanischer Lloyd (2003)
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 18.05.2012
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Phone: [phone] E-Mail: [e-mail]
Fax: [phone] www.wago.com