Manualshelf

Datasheet

ManualsBrandsWAGO ManualsPCB ConnectorsPin strip (standard) 2140 Total number of pins 5 Contact spacing: 3.81 mm 200 pc(s)
12345
Data sheet | Item number:734-265
www.wago.com/734-265
25.04.2019Page /2 5
L = (pole no. – 1) x pin spacing + 5.9mm
Item description
Horizontal or vertical PCB mounting via straight or angled solder pins
100 % protected against mismating; only mating halves with the same number of poles can be connected together
Coding via coding fingers
Safety information 1:
The is designed without breaking capacity for compliance with DIN EN 61984. When used as intended, MCS
MULTI CONNECTION SYSTEM (MCS)
Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are
not live when unmated.
Data
Electrical data
Ratings per IEC/EN 60664-1
Rated voltage (III / 3) 160 V
Rated impulse voltage (III / 3) 2.5 kV
Rated voltage (III / 2) 160 V
Rated impulse voltage (III / 2) 2.5 kV
Rated voltage (II / 2) 320 V
Rated impulse voltage (II / 2) 2.5 kV
Rated current 10 A
Approvals per UL 1059