Datasheet

Data sheet | Item number:733-362
www.wago.com/733-362
10.05.2019Page /2 4
Horizontal or vertical PCB mounting via straight or angled solder pins
100% protected against mismating; only mating halves with the same number of poles can be connected together
Coding via coding fingers
Safety information 1:
The is designed without breaking capacity for compliance with DIN EN 61984. When used as intended, MCS MULTI CONNECTION SYSTEM (MCS)
Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are
not live when unmated.
Data
Electrical data
Ratings per IEC/EN 60664-1
Rated voltage (III / 3) 80 V
Rated impulse voltage (III / 3) 2.5 kV
Rated voltage (III / 2) 160 V
Rated impulse voltage (III / 2) 2.5 kV
Rated voltage (II / 2) 320 V
Rated impulse voltage (II / 2) 2.5 kV
Rated current 6 A
Approvals per UL 1059
Rated voltage UL (Use Group B) 150 V
Rated current UL (Use Group B) 4 A
Approvals per CSA
Rated voltage CSA (Use Group B) 150 V
Rated current CSA (Use Group B) 4 A
Connection data
No. of poles 2
Total number of potentials 2
Number of connection types 1
Number of levels 1
Geometrical Data
Pin spacing 2.5mm/ 0.098inch
Width 7.5mm/ 0.295inch
Height 11.5mm/ 0.453inch
Height from the surface 7.8mm/ 0.307inch
Depth 8.9mm/ 0.35inch
Solder pin length 3.7 mm