Manualshelf

Data Sheet

ManualsBrandsWAGO ManualsPCB ConnectorsPin enclosure - cable 733 Total number of pins 2 Contact spacing: 2.50 mm 1 pc(s)
12345
Data sheet | Item number:733-332
www.wago.com/733-332
06.12.2018Page /2 5
Rated impulse voltage (III / 3) 2.5 kV
Rated voltage (III / 2) 160 V
Rated impulse voltage (III / 2) 2.5 kV
Rated voltage (II / 2) 320 V
Rated impulse voltage (II / 2) 2.5 kV
Rated current 6 A
Legend (ratings) (III / 2) ≙ Overvoltage category III / Pollution degree 2
Approvals per UL 1059
Rated voltage UL (Use Group B) 150 V
Rated current UL (Use Group B) 4 A
Approvals per CSA
Rated voltage CSA (Use Group B) 150 V
Rated current CSA (Use Group B) 4 A
Connection data
No. of poles 2
Total number of potentials 2
Number of levels 1
Geometrical Data
Pin spacing 2.5mm (0.098inch)
Width 7.5 mm / 0.295 inch
Height 13.5 mm / 0.531 inch
Height from the surface 8.9 mm / 0.35 inch
Depth 7.8 mm / 0.307 inch
Solder pin length 4.6 mm
Solder pin dimensions 0.8 x 0.8 mm
Drilled hole diameter (tolerance)
1.1 mm
(+ 0.1)
Plug connection
Contact type (pluggable connector) Male connector/plug
Connector connection type for PCBs
Mismating protection Yes
Mating direction to the PCB 90 °
PCB contact
PCB contact THT
Solder pin arrangement over the entire male connector, in line