Data Sheet

Data sheet | Item number:289-105
www.wago.com/289-105
06.12.2018Page /2 5
Safety and protection:
Rated voltage 250 V
Rated impulse voltage 4 kV
Pollution degree 2
Degree of protection IP00*
Note on Protection Type * Notice!Live conductors! Protection against direct contact must be
provided by the equipment builder, e.g., using a WAGO 709 Series
cover (see Accessories) or a similar cover. The installation
requirements for the particular application must be observed.
Connection data
Connection technology
CAGE CLAMP
®
WAGO terminal WAGO 236 Series
Solid conductor 0.08 … 2.5 mm² / 28 … 12 AWG
Fine-stranded conductor 0.08 … 2.5 mm² / 28 … 12 AWG
Strip length 5 … 6 mm / 0.2 … 0.24 Inch
Note (conductor cross-section) 12 AWG: THHN, THWN
Geometrical Data
Width 51 mm / 2.008 inch
Height from upper-edge of DIN-35 rail 48 mm / 1.89 inch
Depth 85 mm / 3.346 inch
Mechanical data
Type of mounting DIN-35 rail
Housing design Mounting carrier
Material Data
Fire load 0.534 MJ
Weight 80.64 g
Environmental Requirements
Surrounding air (operating) temperature -25 … 40 °C
Commercial data
Country of origin DE
GTIN 4045454198282
Customs Tariff No. 85369010000
Product Group 6 (Interface Electronics)