Datasheet

Data sheet | Item number:2624-3103
www.wago.com/2624-3103
10.05.2019Page /3 5
Rated current UL (Use Group B) 26 A
Rated voltage UL (Use Group D) 300 V
Rated current UL (Use Group D) 10 A
Connection data
Connection technology
Push-in CAGE CLAMP
®
Actuation type Operating tool
Solid conductor 0.2 … 6mm²/ 24 … 10AWG
Fine-stranded conductor 0.2 … 6mm²/ 24 … 10AWG
Fine-stranded conductor with ferrule with plastic collar 0.25 … 2.5mm²
Fine-stranded conductor with ferrule without plastic collar 0.25 … 2.5mm²
Fine-stranded conductor, with twin ferrule 0.25 … 1.5mm²
Strip length 10 … 12mm/ 0.39 … 0.47inch
Conductor entry angle to the PCB 90 °
No. of poles 3
Total number of connection points 3
Total number of potentials 3
Number of connection types 1
Number of levels 1
Geometrical Data
Pin spacing 5mm/ 0.197inch
Width 16.5mm/ 0.65inch
Height 20.3mm/ 0.799inch
Height from the surface 16.3mm/ 0.642inch
Depth 15.4mm/ 0.606inch
Solder pin length 4 mm
Solder pin dimensions 0.8 x 1mm
Drilled hole diameter (tolerance)
1.3 mm
(- … +0.1)
Mechanical data
Type of mounting Feed-through mounting
PCB contact
PCB contact THT
Solder pin arrangement over the entire terminal strip, in line
Number of solder pins per potential 2