Data Sheet

Data sheet | Item number:206-204
www.wago.com/206-204
06.12.2018Page /2 3
Oxidation between crimped single conductors is prevented, virtually eliminating the possibility of any increase in the crimped connection’s
resistance. In some exceptional cases, minute, isolated spaces may be present. However, these instances can be considered as closed off due to
the twisted conductor.
Inadequate crimping can allow the conductor to be pulled out of the connection. Hollow spaces also remain, permitting oxidation formation
and leading to an increase in contact resistance.
Elevated resistance is detrimental for signal transmission, as the signal flow is damped (weakened), and for power transmission, as power loss and,
hence a temperature increase due to contact (risk of fire) can result.
Crimping tools with built-in ratchets are recommended, such as the . These tools only open after the crimping process has WAGO crimping tools
been fully completed. Space-saving crimping from all four sides is ideal for spring clamp termination.
Cross section data for ferruled conductors indicated for WAGO products is based on this crimping method.
Data
Technical Data
Main product function Crimping tools
Material Data
Weight 400.5 g
Commercial data
Country of origin SE
GTIN 4017332085793
Customs Tariff No. 82032000000
Product Group 14 (Tools)
Compatible products
tools
Item no.: 206-203
Retaining spring
www.wago.com/206-203
Item no.: 206-210
Ratchet spring
www.wago.com/206-210
Downloads
Documentation
Bid Text
206-204 Oct 6, 2017 DOC
24.1 kB
Download