Operation Manual

GB
21
W1500 P
11. Correction of Malfunctions
Problem Remedy
A. Water is coming out
of the nozzle
➞ The steam cleaner generates a lot of steam. This may
condense as water or water droplets in the steam hose
and can be expelled when used after a period of cooling.
This is normal and not a cause for concern. (see chapter 8)
B. There is no steam
coming out
➞ Check that the hose has not become kinked or blocked
(allow to cool down rst). Also check the power supply
and water level.
➞ Descale the steam cleaner (see chapter 10).
To prevent the water tank from calcifying empty the water
tank every time it has been used and use distilled or de-
ionised water
C. The steam cap (6)
won't come o
➞ The steam container is still under pressure. Switch o the
device and let it cool down. Press the trigger to release
pressure. (see chapter 9)
D. Steam ow is erratic;
sometimes it works
well, other times it
does not
➞ Check that all accessory parts are positioned correctly (allow
to cool down rst).
➞ Descale the steam cleaner (see chapter 10).
To prevent the water tank from calcifying empty the water
tank every time it has been used and use distilled or de-
ionised water
12. Spare Parts
i
The picture that goes with this table can be found on the fold-out page at the
beginning of the operating manual.
Spare Parts List
Pos. Designation Order No.
2, 3 Measurement jug and funnel 2353111
4 Towel (3 pcs.) 2353106
5 Straight adapter 2351732
6 Steam cap 2353107
7 Extension tube (2 pcs.) 2353109
8, 8a Floor attachment with swivel adapter 2353110
9 Window cleaner 2351733
10, 11 Brush and nozzle kit 2351731
12 Steam plate 2353108