Operation Manual
GB
20
W1500 P
Work in the garden
•
Steam can be used to disinfect soil in ower beds or greenhouses. First loosen the soil
to attain a porous surface. Hold the steam plate (12) over each section for about 2 to 2
1/2 minutes to ensure that the steam has penetrated the surface.
9. Relling the water tank
•
Switch o the steam cleaner at the on/o switch and
disconnect from the mains.
•
Let the steam cleaner cool down for about 5 minutes and
release the pressure by depressing the trigger (Fig. 14).
i
Please note that the steam cap (6) may not be removed while the device is
still under pressure for safety reasons.
•
Wait until there is no more steam coming out and then
turn the steam cap (6) in an anticlockwise direction to
remove it.
•
Fill the steam cleaner with the help of the funnel (Fig. 15, 3)
and measurement jug (2) with max. 1200 ml water.
•
Put the steam cap back on (6) and screw it shut tightly.
•
Switch the steam cleaner back on.
•
As soon as the steam display (orange) goes o, you can
continue your work.
10. Cleaning and maintenance
ATTENTION! Carry out cleaning and maintenance only when the steam
cleaner is switched o and all individual parts have cooled down!
i
To ensure that the steam cleaner functions properly over a longer period, rinse
the water tank once a month to remove any lime scale. When you do this, we
recommend using a vinegar solution or a normal descaler. Depending on how
hard the water is, you might need to descale more often. Using distilled water
is recommended.
•
Clean the steam cleaner and accessories with a slightly damp cloth.
•
Never use a cleaning product or detergent.
•
If the steam cleaner calcies, pour a vinegar solution or a normal descaler into the water
tank and leave it take eect for about 2-3 hours. Please observe also the instructions for
using the descaler provided by the manufacturer.
•
The steam cleaner does not consists of any components that should be repaired by
the customer. All repairs must be carried out by Wagner Customer Services.
D
3
2