Operation Manual

GB
16
W1500 P
6. Assembly
i
Depending on what you require, various accessories can be attached to the
steam gun.
ATTENTION! Carry out assembly work only when the steam cleaner is
switched o and all individual parts have cooled down!
Steam plate (e.g. to remove wallpaper)
•
Press down the button on the steam gun (Fig. 1, 13).
•
Attach the steam plate (Fig. 1, 12) to the gun either with or without extensions (7).

Press

Press
13
7
12



Floor brush (for cleaning oors)
•
Press down the button on the steam gun (Fig. 2, 13).
•
Attach the extensions (Fig. 2, 7) to the gun.
•
Attach the swivel adapter (Fig. 3, 8a) to the extensions (7).
•
Attach the oor brush (Fig. 4, 8) to the swivel adapter
(8a).
•
Push up both the clips on the oor brush upwards (Fig.
5, 8) and attach the oor cloth (4). Make sure the edges
are secured properly.

Press

8a
7
3
8a

8
4


8
4
5

Press
7

13
2