Operating instructions

14
W 140 P
GB
Flexible Nozzle Extension (Illus.7)
For spraying ceilings, resting objects or hard-to-reach areas e.g. radiators
Spare Parts List (Illus. 8)
Pos Name Order No.
1 Suction tube 0413 305
2 Paint container with cover 0413 909
3 Nozzle 0,8 mm 0046 903
4 Locking nut 0413 310
5 Valve 0209 042
6 Pump housing 0412 210
7 Piston spring 0033 028
8 Piston 0198 207
9 Nozzle spanner 0199 327
10 Viscosity measuring cup 0209 058
Correction of Malfunctions
Problem Cause Remedy
Spray gun buzzes
and does not work
Piston stuck
•
Defective drive
•
Disassemble pump and ➞
clean with thinner
Send spray gun to ➞
customer service center
Spray gun does not
suck in
No valve in the pump
•
Insert valve ➞
Spray gun sucks in
but does not spray
Nozzle clogged
•
Ducts and holes in atomiser
•
clogged
Clean ➞
Clean ➞
Spray gun works but
sprays unevenly
Spray material in container
•
running out
Spray gun held inclined
•
leading to sucking in of air
Viscosity of spray material too
•
high (too thick)
Fine adjustment button not
•
set correctly
Nozzle worn out
•
Valve worn out
•
Wrong valve inserted
•
Rell ➞
Use exible nozzle ➞
extension (see accessories)
Dilute accordingly ➞
Reset according to spray ➞
material
Replace ➞
Replace ➞
Use correct valve ➞
Environmental protection
The appliance and accessories should be recycled in an environmentally
friendly way. Do not dispose of the appliance with household waste. Support
environmental protection by taking the appliance to a local collection point or
obtain information from a specialist retailer.