Operating instructions
13
W 140 P
GB
Start-up
Before connecting to the mains supply, please be sure that the supply voltage is identical
with the value given on the rating plate (on the side of the spray gun).
Dilute the spray material according to the above table.1)
Place the container on a sheet of paper and ll it with the prepared spray material.2)
Attention! Do not operate the spray gun without spray material in the
container.
Position the spray gun on the container and turn the container to the right until the 3)
container ts tightly (Illus. 2, arrow).
Activate the switch to start up the spray gun.4)
By turning the ne adjustment button you can vary the spray amount (Illus.3,arrow).5)
Spray Technique
Cover areas that are
•
not to be sprayed. When working keep in mind that wind, for example,
may transport paint mist over great distances and cause damage.
Test the spray gun on cardboard or a similar surface to nd the correct setting.
•
When spraying, hold the spray gun in a horizontal position. Use the
•
exible nozzle
extension (Illus. 7, arrow, special accessories) for spraying upwards (e.g. a ceiling) or
downwards (e.g. an unhinged door laid on the oor).
The spray movement should come from the arm, not just from the wrist. This ensures that
•
a uniform distance is maintained between the spray gun and the spray surface during
the spray operation (Illus. 4).
To achieve optimal spray results, spray back and forth over the surface (Illus. 5).
•
Cleaning and Maintenance
The spray gun can only operate satisfactorily if it is cleaned and preserved after each
use.
Attention! Never immerse the spray gun in liquid when cleaning.
Empty out the remaining paint from the container.1)
Put proper thinner in the container and trigger the sprayer for approx. 2 seconds.2)
Pull the main plug out of the socket.3)
Disassemble the spray gun as shown in Illus. 8 (spare parts).4)
Thoroughly clean all soiled parts.5)
Reassemble the parts in reverse order.6)
Put a few drops of oil (e.g. sewing machine oil) in the intake and runback holes (Illus. 7)
6, arrow). Briey switch on the spray gun.
Accessories W 140 P (not included in scope of delivery)
Designation Order No.
Round spray nozzles for various spray materials:
Very thin spray materials/nozzle size: 0,5 0046 894
Paint container with cover 0413 909
Flexible nozzle extension with atomiser 0046 675