2 JAHRE GARANTIE 2 YEARS GUARANTEE 2 ANS DE GARANTIE W 95 D/GB/F/NL
1 # 0209058 2 3 4 5 # 0050342
6 7 3
8
W 95 GB Read the operating instructions carefully before using the tool and observe the safety instructions. Keep the operating instructions in a safe place. General Safety Instructions Caution! Read all the instructions. Non-observance of the instructions below can cause electric shock, fire and or serious personal injuries. The term "power tool" used below covers both mains-operated power tools (with mains lead) and accumulator-operated power tools (without mains lead).
W 95 GB e) If you work outdoors, use only extension leads that are approved for outdoor use. The use of an extension lead that is suitable for outdoors reduces the risk of an electric shock. 3. Safety of Persons a) Be attentive. Pay attention to what you are doing and work sensibly with a power tool. Do not use the tool if you are tired or under the influence of drugs, alcohol or medication. Just a moment of inattentiveness while using the tool can lead to serious injuries.
W 95 GB c) Remove the plug from the socket before carrying out tool settings, changing accessories or putting the tool away. This precautionary measure prevents unintentional starting of the tool. d) Store unused power tools so that they are inaccessible to children. Do not let persons use the tool who are not familiar with it or who have not read these instructions. Power tools are dangerous when they are used by inexperienced persons. e) Take proper care of your tools.
W 95 GB ● ● ● ● The spray guns are not to be cleaned with flammable solvents which have a flashpoint under 21°C. Take precautionary measures against potential hazards from the spray liquid and follow any instructions given on containers or laid down by the manufacturer of the liquid. Do not spray any liquid of unknown hazard potential. Wear a breathing mask and ear protection. Technical Data W 95 Max. delivery ratee Max. viscosity 140 g/min (runout time) 60 sec. Max.
W 95 GB Spray Material Handling Table for Viscosity Thinner-soluble varnishes/ primers Water-soluble varnishes / primers Automobile spray paint Wood preservatives, disinfectants, plant protectants, polishes, strippers, oils Hammer effect enamel Aluminium paints Viskosity: (Runout time in seconds) 20-35 20-50 18-22 20-45 20-60 18-22 undiluted 25-35 20-30 30-45 20-30 Measuring the Viscosity Dip the viscosity test cup (Illus. 1) completely into the spray material.
W 95 GB ● The spray movement should come from the arm, not just from the wrist. This ensures that a uniform distance is maintained between the spray gun and the spray surface during the spray operation (Illus. 4). ● To achieve optimal spray results, spray back and forth over the surface (Illus. 5). Cleaning and Maintenance The spray gun can only operate satisfactorily if it is cleaned and preserved after each use. Attention! Never immerse the spray gun in liquid when cleaning. 1 2. 3. 4. 5. 6. 7.
W 95 GB Malfunction Cause Correction Spray gun buzzes and does not work Piston stuck Disassemble pump and clean with thinner Send spray gun to customer service center Insert valve Clean Clean Defective drive Spray gun does not suck in Spray gun sucks in but does not spray Spray gun works but sprays unevenly No valve in the pump Nozzle clogged Ducts and holes in atomiser clogged Spray material in container running out Spray gun held inclined leading to sucking in of air Viscosity of spray material t
W 95 GB 2 - Year Guarantee The warrantee is valid for two years, starting on the day of sale (receipt). It includes and is limited to elimination of the defect, proven to have been caused by inferior production materials or mistakes during assembly, free of charge or replacement of the defective parts. Use, start-up or do-it-yourself assembly or repairs which are not listed in our operating instructions are not covered by the warrantee. Parts subject to wear are also excluded from the warrantee.
W95 D CE Konformitätserklärung Wir erklären in alleiniger Verantwortung, dass dieses Produkt den folgenden einschlägigen Bestimmungen entspricht: 73/23/EWG, 89/336 EWG; 2002/95/EG; 2002/96/EG.
D/A J. Wagner GmbH Otto-Lilienthal-Str. 18 D-88677 Markdorf Hotline: 0180/1 00 02 27 +49/75 44/505-0 +49/75 44/505-200 B Wagner Spraytech Belgie Veilinglaan 58 1861 Meise-Wolvertem +32/2/2 69 46 75 GB Wagner Spraytech (UK) Ltd. Haslemere Way, Tramway Industrial Estate Banbury, Oxon OX16 8TY +44/12 95/26 53 53 DK +32/2/2 69 78 45 Kornmarksvej 26 2605 Bro / ndby CH +45/43 43 05 28 Wagner Spol s.r.o.
