operation manual

GB
34
W 890 Flexio
5) Place the nozzle (g. 20, 5) on to the gun body with the recess facing downwards.
6) Put the air screen (g. 21, 4) in the air cap (3). Put both on the nozzle (5) and secure
with the union nut (2).
7) Adjust the setting ring (g. 22, 1) so that the two "horns" grip the air cap and the red
adjustment lever rests on the pin.
8) Place the container seal from below on the suction tube and slide it over the collar,
while turning the container seal slightly.
9) Insert the suction tube with container seal in the gun body.
20. Maintenance
WARNING! Never operate the machine without the air lter; dirt could
be sucked in and interfere with the function of the machine.
Do not store any objects in the air lter compartment.
Change the air lter if it is soiled. Unplug the power plug. Open the cover of the air
lter compartment (Fig. 23). Insert a new air lter into the compartment. Close the
cover of the air lter compartment.
In order to mount the gun more easily apply lubricating grease (enclosed) liberally
to the O-ring at the spray attachment (Fig. 24, item 5 and Fig. 25, item 6) and to the
O-ring of the plug connection of the air hose (Fig. 26, item 2).
21. Storage
Remove the hose and when storing it in the cover put in the gun handle rst.
22. Spare Parts
Spare Parts List Standard spray attachment (Fig. 24)
Pos. Designation Order No.
Standard spray attachment complete with 600 ml container
2365 054
1 Union nut
2362 873
2 Air cap
2362 877
3 Nozzle
2362 878
4 Nozzle seal
0417 706
5 O-ring of spray attachment
2362 875
6 Ventilating hose, valve cover, diaphragm
2304 027
7 Suction tube (no marking or R)*
Suction tube (marking AR)*
2362 876
2367 410
8 Container seal
2323 039
9 Container with cover 600 ml
0414 906