operation manual
GB
26
W 890 Flexio
4. Description/ Scope of delivery
Description/ Scope of delivery (Figs. 1+2)
1) Air cap 2) Nozzle
3) Union nut 4) Standard spray attachment
5) Trigger 6) Material volume regulation
7) Gun handle 8) Air volume control
9) ON/OFF switch 10) Air hose
11) Carry handle 12) Cover
13) Bottom section 14) Main switch
15) Closure 16) Container
17) Gun holder 18) Valve
19) Ventilating hose 20) Wall Extra I-Spray spray attachment
21) Air hose connection 22) Fastener for radiator/detail spray
attachment (accessory)
23) Deposition tray for hardware 24) Cover of air lter compartment
25) Air lter 26) Cable grommet
27) Power cable 28) Air hose retainer
29) Deposition tray for spray attachments 30) Stirring rod
31) Feed hopper 32) Practice poster
33) Replacement nozzle seal (Standard
spray attachment)*
34) Lubricating grease (without
illustration)*
* This is inside the container: remove it before starting operations!
5. Field of application
Many dierent coating substances can be processed with the W 890.
A dierent spray attachment must be used, depending on the coating substance:
Coating Materials Spray attachment
Low-viscosity coating substances:
Water- and solvent-based paints, nishes,
primers, 2-component paints, clear
nishes, automotive nishes, staining
sealers and wood sealer-preservatives.
All coating materials with the red Perfect
Spray logo
Standard