operation manual

GB
24
W 150
14. Maintenance
Air lter
WARNING! Never operate the machine without the air lter; dirt could be
sucked in and interfere with the function of the machine. Disconnect plug
before changing parts.
•
Press both locks (Fig. 12.1) and remove the lter cover.
•
Remove the air lter (2) and replace depending on contamination.
•
Click the lter cover in place again.
Ventilating hose/Valve
•
Pull the ventilating hose (Fig. 10, 13) at the top from the gun body. Screw o the valve
cover (14). Remove the diaphragm (15). Carefully clean all parts or replace in the event
of damage.
•
Place the diaphragm (Fig. 10, 15) with the pin facing upwards on the bottom section
of the valve. Also see the marking on the gun body.
•
Place on the valve cover (Fig. 10, 14) and screw it closed.
•
Place the ventilating hose (Fig. 10, 13) on the valve cover and on the nipple at the gun
body.
15. Spare Parts List
Spare Parts List (Fig. 13)
Pos. Designation Order No.
1 Standard small spray attachment complete incl. 600 ml
container
2370525
2 Union nut 2362873
3 Air cap 2362877
4 Nozzle 2362878
5 Nozzle seal 0417706
6 O-ring 2362875
7 Material volume regulation with spring, complete 0417910
8 Ventilating hose, valve cover, diaphragm 2304027
9 Container seal 2370527
10 Suction tube 2371151
11 Container with cover 2370528
12 Air lter 2370530
13 Air lter cover 2370532
14 Stir stick 2304419
15 Lubricating grease (no g.) 2315539