Technical data

33
Super Finish 7000
GB
contents
Contents
1 SAFETY REGULATIONS FOR AIRLESS SPRAYING 34
1.1 Flash point _________________________________ 34
1.2 Explosion protection _________________________ 34
1.3 Danger of explosion and re from sources of
ignition during spraying work _________________ 34
1.4 Danger of injury from the spray jet _____________ 34
1.5 Secure spray gun against unintended operation __ 34
1.6 Recoil of spray gun __________________________ 34
1.7 Breathing equipment as protection against
solvent vapors ______________________________ 34
1.8 Noise protection ____________________________ 34
1.9 Prevention of occupational illnesses ____________ 35
1.10 Max. operating pressure ______________________ 35
1.11 High-pressure hose (safety instructions) _________ 35
1.12 Electrostatic charging
(formation of sparks or ames) ________________ 35
1.13 Use of units on building sites and workshops _____ 35
1.14 Ventilation when spraying in rooms ____________ 35
1.15 Suction installations _________________________ 35
1.16 Earthing of the object ________________________ 35
1.17 Cleaning the unit with solvents ________________ 35
1.18 Cleaning the unit ___________________________ 35
1.19 Work or repairs at the electrical equipment ______ 35
1.20 Work at electrical components _________________ 35
1.21 Working with a number of guns ________________ 35
1.22 Transport using a crane ______________________ 35
1.23 Setup on an uneven surface ___________________ 36
2 GENERAL VIEW OF APPLICATION ____________ 36
2.1 Application ________________________________ 36
2.2 Coating material ____________________________ 36
2.2.1 Coating materials with sharp-edged additional
materials __________________________________ 36
2.2.2 Filtering ___________________________________ 36
3. DESCRIPTION OF UNIT _____________________ 37
3.1 Airless process ______________________________ 37
3.2 Functioning of the unit _______________________ 37
3.3 Explanatory diagram _________________________ 38
3.4 Transportation ______________________________ 38
3.5 Transport using a crane ______________________ 39
3.6 Technical data Super Finish 7000 _______________ 39
4 STARTUP _________________________________ 40
4.1 Unit with suction system _____________________ 40
4.2 High pressure hose and spray gun ______________ 40
4.3 Connection to the mains network ______________ 41
4.4 Cleaning preserving agent when starting-up of
operation initially ___________________________ 41
4.5 Ventilate unit (hydraulic system) if the sound of
inlet valve is not audible ______________________ 41
4.6 Taking the unit into operation with
coating material ____________________________ 41
5 SPRAYING TECHNOLOGY ___________________ 42
6 HANDLING THE HIGHPRESSURE HOSE _______ 42
6.1 High-pressure hose __________________________ 42
7 INTERRUPTION OF WORK ___________________ 42
8 CLEANING THE UNIT _______________________ 43
8.1 Cleaning the unit from the outside _____________ 44
8.2 Suction lter _______________________________ 44
8.3 High-pressure lter __________________________ 44
8.4 Cleaning the Airless spray gun _________________ 45
9 SERVICING ________________________________ 45
9.1 General servicing ___________________________ 45
9.2 High-pressure hose __________________________ 45
10 REPAIRS AT THE UNIT ______________________ 45
10.1 Inlet valve Pusher ___________________________ 45
10.2 Inlet valve _________________________________ 46
10.3 Outlet valve ________________________________ 46
10.4 Pressure control valve ________________________ 47
10.5 Relief valve ________________________________ 47
10.6 Replacing the diaphragm _____________________ 47
10.7 Replacing the power cable ___________________ 48
10.8 Typical wear parts ___________________________ 48
10.9 Connection diagram _________________________ 49
10.10 Remedy in case of faults ______________________ 51
11 SPARE PARTS AND ACCESSORIES ____________ 52
11.1 Super Finish 7000 accessories _________________ 52
11.2 Spare parts list Pump head ___________________ 54
11.3 Spare parts list Pump-Aggregate ______________ 55
11.4 Spare parts list high-pressure lter _____________ 57
11.5 Spare parts List Trolley _______________________ 57
11.6 Spare parts list suction system (rigid) ___________ 58
11.7 Spare parts list hopper _______________________ 58
Testing of the unit ________________________________ 59
Important information on product liability_____________ 59
Note on disposal __________________________________ 59
Guarantee declaration _____________________________ 59
CE - declaration__________________________________ 123
European service network _________________________ 124