Technical data

40
Plast Coat 15
GB
Accessories for the receptacle
4.3.1 SLIDING COVER
Prevents contamination getting into the coating material. Ex-
tends the hardening time of the coating material, particularly
with direct sunlight.
4.3.2 SACK MANGLE
For using coating material in sacks, a sack mangle can be
placed on the sliding cover.
4.3.3 CONTAINER SUCTION SYSTEM
For sucking up coating material from a container, an external
container can be employed instead of the receptacle.
4.4 COMPRESSOR (ACCESSORY)
V 400 suction volume 360 l/min (fig. 6)
1 Compressor holder
2 Compressed air connection
Note:
Only operate the compressor according operating manual in-
cluded.
2
1
1
2
4.5 MORTAR HOSE WITH ELECTRICAL REMOTE
CONTROL (FIG. 8)
1 Material connection – mortar spraying machine
2 Remote control connection – mortar spraying machine
3 Atomization air connection – compressed air supply
4 Material connection – spray lance
5 Mortar hose
6 Atomization air connection – spray lance
7 Remote control connection – spray lance or remote cont-
rol switch
3
2
1
7
6
5
4
C 350 suction volume 350 l/min (fig. 7)
1 Compressor holder
2 Compressed air connection
Note: Only operate the compressor according to the opera-
ting manual included.
6
7
8
EQUIPMENT OVERVIEW