Owner`s manual

English

Cleaning or

Replacing

Outlet Valve

Start

1. Unscrew outlet valve from outlet valve housing using a

wrench.

2. Remove any accumulated material inside outlet valve

housing using appropriate solution for material being used.

3. Replace with new outlet valve and tighten with wrench.

You will need:

• Wrench

• Rag

• Warm, soapy water if using latex material

• Mineral spirits for oil based material

Replacement of the outlet valve may

be necessary if spray performance

remains poor after following steps in the

Troubleshooting section. Replacement

valves can be ordered by calling the

customer service number found on page 4