Operating instructions

23
Paint Crew
GB
Components
Spray gun with lter
•
Spray tip assembly
•
7,5 mtr. long, 1/4 Zoll diameter high pressure hose.
•
Tools needed for assembly
Two adjustable wrenches.
•
WARNING
Do not plug in the unit until setup is complete.
Controls and functions
ON/OFF switch The ON/OFF switch turns the unit
on and o (O = OFF, l = ON)
Spray Gun The spray gun controls the
delivery of the uid being
pumped.
Spray Hose The spray hose connects the gun
to the pump.
Return Tube Fluid is sent back out through the
return tube to the hopper when
priming.
PRIME/SPRAY knob The PRIME/SPRAY knob directs
uid to the spray hose when set
to SPRAY, or the return tube when
set to PRIME.
Spray
hose
Rear
handle
Motor
housing
ON/OFF
switch
Inlet valve
tool
PRIME/SPRAY
knob
Hopper lid
Spray tip
assembly
Trigger lock
Trigger
Handle
Inlet filter
(inside of hopper)
Return
tube
Frame
Outlet
valve
Tip
storage
Spray
gun
Hopper
TipTip
guard
= ON
= OFF
ON/OFF Switch
SPRAY
PRIME
SPRAY
PRIME
PRIME/SPRAY
knob
PRIME
position
SPRAY
position
Assembly
1
2
3
Place the handle over the unit frame.
Insert the bolts and tighten the wing
nuts over the lock washers.
Thread one end of the high pressure spray
hose to the outlet valve.
Tighten with an adjustable wrench.
Attach return tube to hopper.
Thread the other end of the hose to
the spray gun. Hold the gun with one
adjustable wrench, and tighten the
hose nut with the other.
COMPONENTS AND ASSEMBLY