Technical data

26
GM 4100AC
B_02265
B
C
A
D
B_02266
OPERATING MANUAL
EDITION 12/2008
PART NO. DOC394821
6.2 REPLACING THE MATERIAL HOSE OR AIR HOSE
1. Finishing work and cleaning.
2. Relieve spray gun and unit pressure.
3. Secure gun with trigger safety catch.
Material hose
4. Place open-ended wrench SW A on fl ats of paint connection and counter hold.
5. Turn nut to the right with open-ended wrench SW D and unscrew material hose.
Air hose
4. Place open-ended wrench SW D on fl ats of air connection and counter hold.
5. Turn nut to the right with open-ended wrench SW C and unscrew air hose.
6. Assembly:
Fit the material hose respectively air hose by hand and tighten with 2 open-ended
wrenches.
Counter hold
Note:
Do not unscrew the fi lter
housing. The nut must only be
unscrewed by WAGNER- Serv-
ice-Agency.
Description Wrench A Wrench B Wrench C Wrench D
GM 4100AC with fi lter NPS1/4“
SW 17 mm
0.669 inches
SW 19 mm
0.748 inches
SW 17 mm
0.669 inches
SW 14 mm
0.551 inches
Counter hold