Use and Care Manual

PAGE 1
CLEANUP CLEAN IRE NOTES READ BEFORE CLEANING YOU WILL NEED When using latex material, clean sprayer and components with warm, soapy water. For oil based material use mineral spirits, Never use mineral spirits with latex materials. NEVER use gasoline to clean sprayer. Dispose of used cleaning solution properly. Thorough cleaning and lubrication of sprayer Is important to ensure proper operation after storage.
PAGE 2
CLEANUP CONTINUED 6. Perform Pressure Relief Procedure (page 7). F. Remove the inlet filter. Clean by hand using a soft-bristled brush. Sep back into place when dean, Remove the tip guard and spray tip from the cleaning solution, Lizard by hand using a soft bristled brush, 8. IMPORTANT STEP: Fill the tank with warm, soapy water, Following steps 5-7 in the “Spraying” section, spray at least one gallon of warm, soapy water. This will ensure that the spray tip will be completely clean for the next use. $.