BEFORE YOU BEGIN (3) “This section contains instructions that will be repeated throughout this manual. Read and understand this section before using the equipment. SPRAY GUN TRIGGER LOCK Engage the trigger lock whenever instructed, The gun Is lacked when the trigger lock angle {perpendicular to the trigger in either direction). PRESSURE RELIEF PROCEDURE A Be sure to follow the Pressure Relief Procedure when shutting the unit off for any purpose.
LOAD MATERIAL 20 spray. (3) ‘These steps will prime the system and get it ready www waghercontroipro.comihowtoCP138 YOU WILL NEED The material you plan to spray Extension cord Waste bucket the steps on this page using water to familiarize yourself with the function of the unit as well as to ensure the unit is set up properly. (1) Recommendation: If 1s good practice to perform material or material that has been thoroughly strained. Did material often contains debris that can clog the system.
SPRAYING (3) Follow these steps to deliver spray material from the tank to the spray gun. YOU WILL NEED Waste bucket Scrap material / cardboard Drop cloths to protect floors and furnishings from over spray Make sure the tip and spray guard sre removed. Point the spray gun nits a separate waste container, Unlock the spray gun trigger. Sumerians and hobs rigger for steps 3-3. Tum the power ON fi). Turn the PRIME/SPRAY knob to SPRAY.
