Full Product Manual

1 2

HOUSEHOLD

OIL

HOUSEHOLD

OIL

LONG TERM STORAGE

Follow these steps to prepare your sprayer for long-

term storage.

YOU WILL NEED

• Light household oil (such as 10W30 motor oil or vegetable oil for

example) / All Guard

• Rags

• Two adjustable wrenches

1. Pull trigger guard from gun housing.

2. Tighten the wrench over the wrench ats (a). Unscrew the gun

housing using a wrench.

3. Tip the spray gun upside down and pour a few drops of All Guard

inside the gun housing nut (DO NOT remove the nut).

A penetrating oil like WD40 can be substituted.

Reassemble the spray gun.

4. Place a wrench on the outlet valve to secure it. Using the second

wrench, remove the spray hose.

5. Remove the inlet lter. Pour approximately 2 ounces of All Guard

inside the inlet valve housing. A light oil can be substituted (such

as 10W30 motor oil or vegetable oil for example).

6. Cover the outlet valve with a rag. Turn the power ON (l) and let the

pump run for 5 seconds.

Turn power OFF.

7. Replace inlet lter. Wipe entire unit, hose, and spray gun to

remove accumulated spray material.

tention

Store the unit indoors with the power cord wrapped

around the base.