User Manual
3
before operating the equipment.
EN
Do not expose power tools to rain or wet conditions.
Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an
outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged
cords immediately.
When operating a power tool outside, use an outdoor extension cord marked “W-A” or
“W”.
PERSONAL SAFETY
Stay alert, watch what your are doing and use common sense when operating a
power tool. Do not use tool while tired or under the inuence of drugs, alcohol or
medication.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from moving parts.
Avoid accidental starting. Be sure switch is turned o before plugging in.
Do not overreach. Keep proper footing and balance at all times.
Use safety equipment. Always wear eye protection.
Accessories must be rated for at least the speed recommended on the tool warning
label.
Hold tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring or its own cord.
TOOL USE AND CARE
Use clamps or other practical way to secure and support the workpiece to a stable
platform.
Do not force tool. Use the correct tool for your application.
Do not use tool if switch does not turn it on or o.
Disconnect the plug from the from the power source before making any
adjustments, changing accessories, or storing the tool.
Store idle tools out of reach of children and other untrained persons.
Maintain tools with care. Keep cutting tools sharp and clean.