Manualshelf

Use And Care Manual

ManualsBrandsWagner ManualsAirless Paint Sprayers & Power RollersStudio Plus HVLP Paint Sprayer
12345678910
EN
9
PROPER SPRAYING TECHNIQUE (continued)
PATTERN EXAMPLES


STOP
During a project, periodically wipe the nozzle tip with a cloth to remove any dried paint.
LARGE SURFACE PROJECTS



       


•       

SMALL SURFACE PROJECTS AND FINE FINISHING



• 
• 
i
If after following the guidelines on these two pages you are still not getting the spray performance you need, refer to the
‘Troubleshooting’ section on page 13.

• Distance from the spray object -
• Spray gun movement -

• Material thickness - 
i
Only thin the material if absolutely necessary to improve spray performance. Optimal spray performance should be acheived
simply by adjusting the various controls on the unit.
If the material needs to be thinned, dilute the material in steps of 10% until the desired nish is acheived.
=
=
=
=
=
=
=
=
=