Manualshelf

Use And Care Manual

ManualsBrandsWagner ManualsAirless Paint Sprayers & Power RollersStudio Plus HVLP Paint Sprayer
12345678910
8
EN
PROPER SPRAYING TECHNIQUE
STOP
The item you are spraying must be properly masked in order to prevent overspray from covering woodwork, oors or other
furnishings.


SURFACE PREPARATION


SPRAY AREA PREPARATION

HOW TO SPRAY PROPERLY
STOP
It is important to keep your arm moving whenever the gun is being triggered. If you pause or linger in one spot too long,
too much material will be sprayed to the surface.
STOP
Partially pulling the trigger will start the turbine, but no material will spray until the trigger is pulled fully. It is recommended
that the trigger rst be pulled partially in order to start the turbine before a spray pass is made.
3 - 6 inches
Correct
Even coat throughout
Keep stroke smooth and at an even speed
Incorrect
Do not ex wrist while spraying.
Light coat Heavy coat Light coat
• 



• 


• 

• 

• 




STOP
During a project, periodically wipe the nozzle tip with a
cloth to remove any dried paint.
i
When you quit spraying for any length of time, unplug the
sprayer. When you restart, wipe the nozzle with a damp
cloth to remove any dried paint.