Use And Care Manual

EN
13
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Problem A: Little or no material ow  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Problem B: Material leaking  
 
 
 
 
 
 
 
Problem C: Spray pattern too thick, runs
and sags
 
 
 
 
 
 
 
 
 
 

 
 
 
 
Problem D: Spray jet pulsates  
 
 
 
Problem E: Too much overspray  
 
 
 
Problem F: Pattern is very light and
splotchy
 
 
 
 

 
 
i
*Only thin the material as a last resort to improve spray performance. Optimal
spray performance should be acheived simply by adjusting the various controls
on the unit.
This unit contains no servicable electrical parts. Do not attempt to service
yourself. Store indoors with the cord wrapped around the turbine handle.
Have you tried the recommendations above and are still having problems? In the
United States, to speak to a customer service representative, call our Technical Service
at 1-800-328-8251. See www.wagnerspraytech.com in the “Contact Us” section for
Technical Service hours.