Use And Care Manual

MAINTENANCE
12
EN
CLEANING THE FILTER
IMPORTANT: Before every use, you should inspect the air lter in the
turbine to see if it is excessively dirty. If it is dirty, follow these steps
to replace it.
IMPORTANT: Never operate your unit without the air lter. Dirt
could be sucked in and interfere with the function of the unit.
1. 
2. 

  
CLEANING THE AIR VALVE TUBE
i
If paint has entered the air tube, proceed as follows.
1. 

  

IMPORTANT: The air tube and valve seal (c) are only solvent-resistant
to a limited extent. Do not immerse in solvent, only wipe.
2. 

i
Installing the valve seal into the valve cover will be much
easier if the valve cover is inverted.
3.          

i
Turning the nozzle upside down will prevent the valve seal
from falling out of the valve cover during reinstallation.
4. 
1
(a)
(b)
(c)
(d)
2
(c)
(b)
3
4