Use And Care Manual

English

Setup

Before you begin

NEVER point the spray gun at any part

of the body.

IMPORTANT: Make sure the power cord is

unplugged.

Setup

Note: Make sure the system is placed on a level, clean

surface. Follow these instructions for both one-gallon

and ve-gallon containers.

1. Lift up the suction tube holder as far as it will go.

2. Position the material container next to the pump

assembly as shown. The container handle (a) should

be vertical and placed in between the two suction

tube guides.

Slide the suction tube

holder

(b) down until it

touches the top of the material container.

The

container is now secured to the pump and the entire

unit can be carried by the container handle.

IMPORTANT: The container handle must be placed

between the two suction tube guides, or the

container will tip when carried due to the added

weight of the pump assembly.

3. Place the suction tube back into position in the

suction tube guide. Make sure the tube reaches the

bottom of the material container.

Watch Setup: