Use And Care Manual

English
© Wagner Spray Tech. - All Rights Reserved 5
Controls and Functions
Fluid Pump:
The uid pump delivers material from the
material container to the spray nozzle via the
paint hose.
X-Boost Turbine:
The X-Boost Turbine supplies the air that
forces the material out of the spray nozzle.
When plugged in, power to the turbine is
provided by pulling the trigger.
iSpray Nozzle:
Designed for spraying thicker materials, such
as latex paints and stains. Spraying with this
nozzle will leave a slightly coarser nish that
is between a roller and ne-nish sprayer.
a
b
Adjustment ring
The spray pattern shape is adjusted by
turning the adjustment ring (a) to either the
vertical or horizontal positions.
Make sure the black retaining ring (b) is
not loosened.
ON/OFF Switch:
The ON/OFF switch on the uid pump turns
power to the system on and o.