Product Manual

CLEANUP NOTES
EN
9
i
When cleaning, use the appropriate cleaning
solution (warm, soapy water for water-based
coatings, and mineral spirits for oil-based
coatings.
Special cleanup instructions for use with
ammable solvents (must have a ashpoint
above 100ºF (38ºC):
• Always ush spray gun outside.
• Area must be free of ammable vapors.
• Cleaning area must be well-ventilated.
• Do not submerge turbine!
i
For basic quick-cleaning between color
changes, ll the material container with
cleaning solution and spray the cleaning
solution through the gun and into a waste
container.
1. Turn turbine OFF and unplug the power cord.
Remove the container and empty any remaining material.
Thoroughly rinse the material container with warm, soapy
water (or mineral spirits for oil-based materials).
2. Remove the pickup tube and container seal.
3. Loosen and remove the locking nut (A) from the front of the
sprayer. Remove the air cap (B) and gun body (C).
Remove the nozzle (D) from the rear of the gun body.
Clean all parts with warm soapy water (or mineral spirits for
oil-based materials).
4. Clean the air vent (E) on the suction tube with a soft bristled
cleaning brush.
At
tention
Never clean the spray gun with metal objects.
CLEANUP
1
2
3
A
B
C
D
4
E
See next page for reassembly