Product Manual

REASSEMBLY / MAINTENANCE

REASSEMBLY

MAINTENANCE

1. Insert the nozzle (D) into the gun body (C) so that the slots

in the nozzle engage in the gun body's three (3) guide

rails.

2. Slide the gun body (C) into the front of the turbine. Put

the air cap (B) onto the nozzle and tighten it using the

locking nut (A).

3. Attach the pickup tube. Attach the material container.

tention

Before every use, you should inspect the air

lter in the turbine to see if it is excessively

dirty. If it is dirty, follow these steps to

replace it.

Never operate your unit without the air

lter. Dirt could be sucked in and interfere

with the function of the unit.

1. Pull the air lter out of the gun and re-insert cleaned or

new air lter.