Use And Care Manual
English
7
Spraying
Technique
StartStart
3. Keep your arm moving at constant speed and keep the
sprayer at a constant distance from the surface. The
sprayer should be triggered at the beginning of the stroke
and released at the end of the stroke.
1. Spraying horizontally (side to side) -
Orient the spray tip as shown.
4. Keep the sprayer at a consistent distance to the
surface. This means moving your entire arm back
and forth rather than just exing your wrist. Overlap
each stroke by 50%.
2. Spraying vertically (up and down) -
Orient the spray tip as shown.
To prevent an injection hazard,
make sure the sprayer is
unplugged before you adjust the
spray tip. Make sure the spray tip
issufcientlyhandtightened.
Never tip the sprayer at more than
a 45º angle when spraying
overhead. Material could get into
the motor housing and cause an
electric shock.
Adjusting the
spray tip:
Keep stroke
even
End
stroke
Start
stroke
Pull
trigger
Release
trigger
Move steadily
Aproximately
10 to 14 inches
3 4
1 2