User manual

34
B_04130
OPERATING MANUAL
VERSION 03/2013 ORDER NUMBER DOC 2310799
6.5.2 FILLING WITH SEPARATING AGENT
Pour the supplied separating agent into the intended opening.
Filling level: 2 cm; 0.8 inch under the cup edge
Separating agent: See accessories.
Notice
Maximum permissible inclination of pump for moving, transportation
etc. after  lling it with separating agent ± 30°.
The pump must be vertical during operation.
Piston pump runs dry!
High wear/damage to the packings.
Paint or solvent can escape if the seals are dry.
Ensure that the separating agent container is  lled with su cient separating agent.
Filling level 2 cm; 0.8 inch under the cup edge.
NOTICE