Owner`s manual

13
English


A. The pump will not run
  
C. The motor does not turn off.
D. There is paint leakage.
E. Water leakage from the

during cleaning.

  
in outlet.
2. The variable speed dial is turned to 0

pressed.
3. There is a kink in the air hose.
1. The suction tube is not immersed in the
paint.
2. There is an obstruction in the suction tube.
3. The paint can is empty.
4. The O-rings on the Quick-clean™ inlet
plug are worn or dirty.
5. The Quick-clean™ plug is missing from the
Quick-clean™ adapter.
1. The handle button is activated.
2. There is a kink in the air hose.
3. There is an air switch malfunction.
1. The seal on the roller arm is backwards.
2. The seal and cap were not properly
cleaned.
3. The O-ring and the connecting area were
not cleaned properly.
4. Paint residue on connecting areas.
5. The O-rings are damaged or missing.
6. The roller cover is worn or damaged.
7. The roller core or cap is worn or damaged.
8. The bearing areas on the roller arm are
worn.
9. The pump tube is punctured.
10. The paint hose is damaged.
11. The O-rings on the Quick-clean™ inlet
plug are worn or dirty.
12. The Quick-clean™ plug is missing from the
Quick-clean™ adapter.
1. Missing washer.

1. Plug the power cord into 120V outlet
  
press handle button.
3. Unkink the air hose

  
2. Remove the obstruction.
  
  
5. Install Quick-clean™ plug.
1. Press and release handle button.
2. Unkink the air hose.
  
1. Turn the seal around.
2. Clean and properly lubricate.
  
4. Clean connecting areas.
5. Replace the O-rings*
6. Replace the roller cover*.
7. Replace the roller core or cap*.
8. Call Customer Service
9. Call Customer Service
10. Call Customer Service
  
12. Install Quick-clean™ plug.
1. Replace.





Register your product online at www.wagnerspraytech.com. Proper registration will serve as proof of purchase in the event your
original receipt becomes misplaced or lost.