Owner`s manual

Reassembly /
Maintenance
Start
English
10
You will need:
• Scrap piece of wood or
cardboard
• Household oil
1. Slide the spring onto the front
end of the piston.
Insert the piston into the back
of the pump housing.
5. Turn the sprayer upside-down
while the cup is removed.
Squeeze a small amount
of household oil into both
the intake (a) and return
(b) openings on the pump
housing.
4. Insert the atomizer valve into the
front end of the pump housing.
Place the spray tip onto the pump
housing and turn it clockwise until
it is tightened securely.
2. Insert the pump housing
assembly into the front of the
sprayer.
6. Plug in the sprayer. Aim
at piece of scrap wood or
cardboard and squeeze the
trigger of the sprayer for 2 to
3 seconds while sprayer is still
inverted.
7. Reassemble and reattach the
suction tube.
Replace the cup.
3. Place the locking nut onto
the pump housing. Press in
while turning the locking nut
clockwise.
Do not cross-thread the
locking nut. Make certain it
is threaded correctly before
tightening.
1
(a) (b)
54
2
6 7
3
MULTI-PURPOSE
OIL