User Guide
58        | Troubleshooting
Common 
Symptoms
What You 
Experience
Possible Solutions
Missing Color Picture missing 
color
•Perform monitor self-test.
•Ensure that the video cable connecting the 
monitor to the computer is connected properly 
and is secure.
•Check for bent or broken pins in the video cable 
connector.
Wrong Color Picture color 
not good
•Change the settings of the Preset Modes in the 
Color menu OSD depending on the application.
•Adjust R/G/B value under Custom. Color in Color 
menu OSD.
•Change the Input Color Format to PC RGB or 
YPbPr in the Color menu OSD.
•Run the built-in diagnostics.
Image retention 
from a static 
image left on 
the monitor for 
a long period of 
time
Faint shadow 
from the static 
image displayed 
appears on the 
screen
•Use the Power Management feature to turn o 
the monitor at all times when not in use (for more 
information, see Power Management Modes).
•Alternatively, use a dynamically changing 
screensaver.
Product Specific Problems
Specific 
Symptoms
What You 
Experience
Possible Solutions
Screen image is 
too small
Image is 
centered on 
screen, but does 
not fill entire 
viewing area
•Check the Aspect Ratio setting in the Display 
menu OSD.
•Reset the monitor to factory settings.
Cannot adjust 
the monitor 
with the buttons 
on the front 
panel
OSD does not 
appear on the 
screen
•Turn o the monitor, unplug the monitor power 
cable, plug it back, and then turn on the monitor.
•Check whether the OSD menu is locked. If yes, 
press and hold the button beside the power 
button for 6 seconds to unlock (for more 
information, see Lock).
No Input Signal 
when user 
controls are 
pressed
No picture, 
the LED light is 
white
•Check the signal source. Ensure the computer 
is not in the power saving mode by moving the 
mouse or pressing any key on the keyboard.
•Check whether the signal cable is plugged in 
properly. Re-plug the signal cable if necessary.
•Reset the computer or video player.
The picture 
does not fill the 
entire screen
The picture 
cannot fill the 
height or width 
of the screen
•Due to dierent video formats (aspect ratio) of 
DVDs, the monitor may display in full screen.
•Run the built-in diagnostics.










