Application Guide

ManualsBrandsWagner Spraytech ManualsPaint ApplicationWagner Spraytech 0529010 FLEXiO 590 HVLP Paint Sprayer

To use the Dell UltraSharp Color Calibration Solution follow the steps given below:

1.Plug the X-Rite i1Display Pro colorimeter into any available host USB port on your computer or on the display (Refer to the Quick Start Guide or User Guide that comes

with your UP2516D/UP2716D display).

NOTE: It is recommended to quit other running programs before you start the Dell UltraSharp Color Calibration

NOTE: You may need to change the monitor preset mode using the OSD to CAL1 or CAL2 before calibration starts. (Color Setting -> Preset Modes -> Color Space)

NOTE: Connect only the UP2516D/UP2716D you intend to calibrate to the PC when performing calibration. Disconnect other UP2516D/UP2716D if you have multiple monitors or daisy

chaining monitors setup.

Dell ™ and Dell logo are trademarks of Dell inc. in the United States and /or other jurisdictions. All other marks and names mentioned herein may be trademarks of their

respective companies.

• If Autorun is disabled on your computer, navigate to the CD / DVD drive to ﬁnd CDBrowse.exe and double click to install it.

Then, follow the step-by-step on-screen instructions tocomplete the installation.

Using the Dell UltraSharp Color Calibration Solution

You will need an X-Rite i1Display Pro Colorimeter to use the Dell UltraSharp Color Calibration Solution software. The X-Rite i1Display Pro Colorimeter is available in selected countries

for purchase from Dell. Kindly contact a Dell representative to ﬁnd out if its available in your country. X-Rite i1Display Pro Colorimeter is also available from X-Rite’s North American and

Pantone online stores, and also from X-Rite’s worldwide network of resellers.

2.Launch the Dell UltraSharp Color Calibration Solution application by double clicking on the program icon found on the desktop or under Start-> All Programs ->Dell

Displays. Then follow the step-by-step on-screen instructions.

NOTE: Once you begin the proﬁling process, ensure that you do not change any of the color settings from the front panel using the On-Screen-Display (OSD) menu. Changing these

settings during calibration could cause the measurements to be inconsistent and lead to inaccurate calibrations and proﬁles. if you change any of these setting after running the

Dell UltraSharp Color Calibration Solution, results may not be accurate and you may need to run the Dell UltraSharp Color Calibration Solution again.