Product Manual

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. REPORT NO.: LCS1507020136S
Safety Data Sheet
Page 5 of 16
mist.
Eyes and Face: Chemical splash goggles are preferred. Also acceptable are 'visor-gogs' or a chemical face shield
worn over safety glasses.
Hands, Arms, Body: Vinyl coated, VC, gauntiet type gloves with rough finish are preferred.
Other Special Clothing and Equipment: Safety shoes are recommended when handling batteries. All footwear
must meet requirements of ANSI Z41.1 - Rev. 1972.
Section 9- Physical and Chemical Properties
Physical State: Solid state
Electrolyte:
Boiling Point: 230°F/110℃ Melting Point Lead: 327.4℃
Specific Gravity: 1.215 - 1.350 Vapor Density: Not determined
% Volatiles By Weight: Not Applicable Vapor Pressure: Not determined
Solubility in Water: 100% (electrolyte) Evaporation Rate: Not determined
Appearance and Odor: Electrolyte is a clear liquid with an acidic odor.
Section 10- Stability and reactivity
Stability: Stable during normal operation conditions.
Conditions to Avoid: Sparks and other sources of ignition.
Incompatibility: (materials to avoid)
Lead/lead compounds: Potassium, carbides, sulfides, peroxides, phosphorus, sulfur.
Battery electrolyte (acid): Combustible materials, strong reducing agents, most metals, carbides, organic
materials, chlorates, nitrates, picrates, and fulminates.
Hazardous Decomposition Products:
Lead/lead compounds: Oxides of lead and sulfur.
Battery electrolyte (acid): Hydrogen, sulfur dioxide, and sulfur trioxide.
Conditions to Avoid: High temperature. Battery electrolyte (acid) will react with water to produce heat. Can react
with oxidizing or reducing agents.