Warranty

Wagan Tech and wagan.com are trademarks of Wagan Corporation.

User’s Manual—Read before using this equipment

SPECIFICATIONS

Voltage 12V DC

Power Draw 150 Watts

Max Torque 258 ft-lb

Cable Length 9.5 ft (2.9 m)

Fuse Rating 15A, 250V

Square Drive Anvil ½” (12.7 mm)

Included Socket Diameters 17/19 mm, 21/23 mm

OPERATION

Start the engine before operating the wrench. Keep the engine running while

using. Unplug impact wrench from 12V DC socket when not in use.

Switch operation

• For loosening lug nuts, press the side of the switch marked “L”

• For tightening lug nuts, press the side of the switch marked “T”

• To power off, simply release the switch

• IMPORTANT: After tightening with the wrench, it is important to check the

speciﬁed torque by using a torque wrench. Consult your vehicle’s manual

for recommended torque speciﬁcations.

Loosen Lug Nuts

• Use your jack to lift up your car and ensure there is about 2 inches (5 cm)

between the tire and the ground

• Refer to your car’s operation manual for the recommended lifting

point and safe operations