Specifications

147Contents, specifications and availability are subject to change serving the technical improvement.146 Contents, specifications and availability are subject to change serving the technical improvement.
Sine wave inverterswww.waeco.comSinePower
T
wo models
to choose from
Remote control for sine wave inverters SP 700 to SP 3000
S
uperbly served – with two models to choose from
The sine wave inverters SP 700 to SP 3000 can be complemented with the MCR-6 or MCR-8 remote
c
ontrols to suit different convenience requirements. The MCR-8 enables basic inverter ON/OFF
functionality, while the MCR-6 offers the additional benefits of LED indication for all relevant system
information. Both remote controls are suitable for switchboard mounting.
WAECO SinePower Accessory 3.30
M
CR-6 MCR-8
Dimensions (W x H x D) 130 x 120 x 25 mm 58 x 72 x 28 mm
W
eight 400 g 40 g
Cable length 7.5 m 7.5 m
Quality features Low-voltage, over-voltage, Power on indicated by red LED
overheat and overload
indicated by red LED,
stand-by and power on
indicated by green LED
Products Ref. No.
Comfort remote control for SP 700 – SP 3000 MCR-6
Standard remote control for SP 700 – SP 3000 MCR-8
I
deal for low-power
electrical appliances,
s
uch as laptops,
TVs, satellite units,
D
VDs, VCRs
Turn 12 or 24 V
b
attery voltage
i
nto pure 230 V AC
Output for connection
o
f an external
ON/OFF switch
WAECO SinePower SP 162 / SP 164 / SP 352 / SP 354 3.30
SP 162 / SP 164 SP 352 / SP 354
Input voltage 12 volts DC (10.5 to 15 volts) or 24 volts DC (21 to 30 volts)
O
utput voltage/curve 230 volts AC/sine wave
O
utput frequency 50 Hz 50 Hz
N
o-load current input 12 volts: 1.2 A/24 volts: 0.6 A 12 volts: 1.2 A/24 volts: 0.6 A
C
ontinuous power (30 min.)
1
50 watts 350 watts
Peak power 300 watts 700 watts
Efficiency Up to 90% Up to 90%
Dimensions (W x H x D) 147 x 60 x 185 mm 147 x 60 x 185 mm
W
eight approx. 1.2 kg approx. 1.4 kg
Q
uality features Electronic overload and short circuit protection,
over-voltage and low-voltage cut-off, reverse pole protection by fuse,
can be switched on or off by external switch
Test marks e-approved according to 95/94/EC (EMC guidelines for vehicles),
C
E, EN 60950-1
P
roducts Ref. No.
SinePower SP 162 150 watts 12 volts MSK160-012
SinePower SP 164 150 watts 24 volts MSK160-024
S
inePower SP 352 350 watts 12 volts MSK350-012
SinePower SP 354 350 watts 24 volts MSK350-024
Sine wave inverters turn 12/24 volts battery voltage into pure 230 volts AC. The light-weight,
c
ompact and inexpensive 150- or 350-watt inverters are perfectly sufficient for most commonly
u
sed high-tech appliances. They are easily accommodated – even where space is limited.
Both model ranges feature an output for connection of an external ON/OFF switch.
S
P 354
S
P 162
Ideal for powerful
appliances such
as microwave
ovens
and professional
coffeemakers
SP 2000 and SP 3000
with additional
230-volt output
for terminal connections
2000- and 3000 watt
models specifically
designed for
professional use
WAECO SinePower SP 700 / SP 1000 / SP 1500 / SP 2000 / SP 3000 3.30
SP 700 SP 1000 SP 1500 SP 2000 SP 3000
Input voltage 12 volts DC (11 to 15 volts) or 24 volts DC (22 to 30 volts)
Output voltage/curve 230 volts AC/sine wave
Output frequency 50 Hz
Input current standby 0.25/0.15 A 0.25/0.15 A 0.28/0.15 A 0.5/0.25 A 0.55/0.35 A
Continuous power (30 min.) 700 watts 1000 watts 1500 watts 2000 watts 3000 watts
Spitzenleistung 1200 watts 2000 watts 3000 watts 4000 watts 6000 watts
Efficiency up to 91%/93% 91%/94% 91%/93% 91%/93% 90%/93%
Dimensions (W x H x D mm) 180 x 72 x 295 182 x 88 x 383 191 x 88 x 415 208 x 160 x 422 208 x 166 x 452
Weight approx. 2.7 kg 4.0 kg 4.8 kg 9.0 kg 9.8 kg
Qualitätsmerkmale Electronic overload and short circuit protection, over-voltage and low-voltage
cut-off, automatic reverse pole protection, overheat cut-off, status indicated
by three-colour LED, microprocessor controlled output voltage.
Sleep mode: To prevent unnecessary strain on the vehicle battery,
the sine wave inverters are equipped with a power-save mode.
This mode is automatically activated as soon as there are no
230-volt consumers being operated.
Material Anodised aluminium housing
Test marks e-approved to 95/54/EC (EMC guidelines for vehicles), EN 60950
Products Ref. No.
SinePower SP 700 700 watts 12 volts MSK700-012
SinePower SP 700 700 watts 24 volts MSK700-024
SinePower SP 1000 1000 watts 12 volts MSK1000-012
SinePower SP 1000 1000 watts 24 volts MSK1000-024
SinePower SP 1500 1500 watts 12 volts MSK1500-012 (no photo)
SinePower SP 1500 1500 watts 24 volts MSK1500-024 (no photo)
SinePower SP 2000 2000 watts 12 volts MSK2000-012 (no photo)
SinePower SP 2000 2000 watts 24 volts MSK2000-024 (no photo)
SinePower SP 3000 3000 watts 12 volts MSK3000-012
SinePower SP 3000 3000 watts 24 volts MSK3000-024
Sine wave inverters turn 12/24 volts battery voltage into pure 230 volts AC.
Premium models for ultimate demands: these industry-standard inverters offer continuous power
rates to suit even professional demands. The series for large motorhomes, yachts and buses.
Remote control as optional accessory.
SP 700
SP 3000
SP 1000
MCR-6
M
CR-8
For all inverters
up to 2300 watts
WAECO PerfectPower Accessory 3.30
Input voltage 230 volts AC
Output voltage 230 volts AC
Output frequency 50 Hz
Continuous power 10 A
Maximum output 2300 watts
Dimensions (W x H x D) 190 x 80 x 80 mm
The VS-230 mains priority circuit was designed for voltage management in vehicles
with two optional power supplies.
If an appliance is connected to two 230-volt power sources – a mains power source and an inverter
that draws power from the vehicle battery – priority is given to the mains power source. This prevents
unnecessary use of limited battery power. The priority circuit is suitable for all inverters with a
capacity up to 2300 watts – including those already in use.
Product Ref. No.
Mains priority circuit for WAECO inverters VS-230
★★★★★
E
xcellent
Test 6/2007