Specifications

125Contents, specifications and availability are subject to change serving the technical improvement.124 Contents, specifications and availability are subject to change serving the technical improvement.
Battery carewww.waeco.comPerfectBattery BC 100 / BC 200
B
C 200
Battery connections 1
Input voltage 230 volts AC
Input voltage range 180 to 253 volts AC / 50 to 60 Hz
End-of charging voltage 7.0 volts DC
Float charging voltage 6.5 volts DC
Charging indicator 3 LEDs
Maximum charging current 2.0 A
Operating temperature 0°C to +50°C
Dimensions (W x H x D) 70 x 100 x 60 mm
Weight 0.45 kg
Quality features Overload and short circuit protection
Test mark CE
Scope of delivery:
Basic unit, adapter cable with battery clamps, operating instructions
B
C 100
B
attery connections 1
Input voltage 230 volts AC
Input voltage range 180 to 253 volts AC / 50 to 60 Hz
End-of charging voltage 13.8 volts DC
F
loat charging voltage 13.0 volts DC
C
harging indicator 3 LEDs
M
aximum charging current 1.0 A
Operating temperature 0°C to +50°C
Dimensions (W x H x D) 70 x 100 x 60 mm
Weight 0.45 kg
Quality features Overload and short circuit protection
Test mark CE
Scope of delivery:
B
asic unit, adapter cable with battery clamps, operating instructions
F
itness training for
1
2-volt and 6-volt
batteries
B
ridge long periods
of standstill
C
an also be used as
battery charger and
b
ack-up power supply
WAECO PerfectBattery BC 100 / BC 200 3.28
Products Ref. No.
PerfectBattery BC 100, 12 volts MBCC-100
PerfectBattery BC 200, 6 volts MBCC-200
› Three functions in one unit:
conditioning, charging, back-up
›
For service and maintenance of all
6-volt and 12-volt lead batteries
›
Simple connection to the cigarette lighter
socket or with battery clamps included in the
delivery kit
› For cars, motorhomes, boats, vintage cars and
motor cycles
›
Short-circuit and reverse pole protection
› Condition batteries with a capacity
f
rom 10 Ah to 150 Ah
› Charge batteries with a capacity
from 10 to 30 Ah
Battery conditioners – training for 12-volt and 6-volt batteries
Three functions: conditioning – charging – back-up
WAECO PerfectBattery BC 100 and BC 200 are inexpensive
battery conditioners that maintain lead batteries from
10 to 150 Ah by gently simulating driving. As a result, the
full capacity can be maintained even after months of
standstill. Battery conditioners are ideal for summer
vehicles such as soft-tops, motor cycles and vintage cars;
the BC 200 model was specifically designed for 6-volt
batteries.
WAECO conditioners offer two useful extra functions. They
serve as a battery charger for batteries between 10 and
30 Ah (motor cycles, vintage cars). They can also be used
as a back-up power supply unit. When a vehicle’s starter
battery has to be removed, the conditioners temporarily
take over the power supply to the appliances. In this way,
stored data – e. g. in car radios – can be retained.
Battery conditioners
Training for the battery