Specifications

81Contents, specifications and availability are subject to change serving the technical improvement.80 Contents, specifications and availability are subject to change serving the technical improvement.
Compressor refrigeratorswww.waeco.comCoolMatic MDC
Compressor refrigerators in absorption dimensions
Tailor-made for your motorhome and caravan
Interior
Space is in short supply onboard a motorhome or caravan. Therefore, it’s important to make the most of
what’s available. The interior design of the CoolMatic MDC refrigerators is a good example of how this can
be done. Its optimum utilisation of space in height, width and depth, the spacious freezer compart-
ments, the vertical space for 1.5-litre bottles as well as the absence of unnecessary decorative elements
illustrate the well thought-out design.
Details
All interior shelves are adjustable in height and have a retaining bar at the front edge. A special fixing
device makes sure that they stay firmly in place in all situations. Fold-up sections in the shelves provide
additional room for large bottles or bulky items.
You can take our word for it: CoolMatic MDC compressor refrigerators fit into your motorhome or caravan as if
they had been made to measure. This is because they have the same outer dimensions as commonly used
absorption refrigerators but offer a considerably larger useful capacity.
So they can easily replace them, and there are many good reasons for the conversion. CoolMatic MDC refrigerators
provide excellent cooling performance at extreme ambient temperatures and in inclined positions. They work quietly
and economically. Due to their outstanding energy efficiency, CoolMatic MDC refrigerators are ideally suited for
operation with a solar unit.
A big advantage with the CoolMatic MDC series: there is no need to
install a gas supply, and no need to drill holes in the body of your
motorhome or caravan! An air intake/outlet is unnecessary either,
provided you ensure adequate ventilation elsewhere.
When installing your MDC refrigerator, you should always leave a small
gap between it and the wall (Fig. 1). In the example given in Fig. 2, air
intake is ensured by the gap between the fridge bottom and the floor.
Air outlet is via the shutter at the top rear of the refrigerator. Of course,
you can also install your refrigerator at eye level. In that case, there
should be enough space for air intake between the floor and the wall.
Air outlet is via the shutter at the refrigerator front (Fig. 3).
Another example of how to provide optimum ventilation is shown in
Fig. 4: air intake and outlet is through two shutters, at the top and
bottom of the refrigerator front.
Fig. 1 Fig. 2 Fig. 3 Fig. 4
VentilationOptimum utilisation of space
closed vent
Refrigerator when closed and in “vent” position Spacious, separate freezer
compartments for frozen
food
Convenience day and night:
interior light as standard
Left or right opening – either is possible
with the variable door mounts
CoolMatic MDC-50
CoolMatic MDC-65
CoolMatic MDC-110
C
oolMatic MDC-90
Wit
h
pa
t
e
n
t
e
d
door lock
–
s
a
f
e a
nd
s
e
c
u
re