Specifications

195Contents, specifications and availability are subject to change serving the technical improvement.
Cruise controls
194 Contents, specifications and availability are subject to change serving the technical improvement.
www.waeco.comMagicSpeed MS 900
Choose your own speed!
Cruise control for vehicles with CAN bus and electronic accelerator
In more and more vehicles, the entire engine management is done
by highly complex electronics. The individual control units are
networked by CAN bus links, and the pressure on the accelerator
pedal is transmitted electronically. Conventional cruise controls with
servo unit usually cannot be used in such models.
Even so, no motorist needs to go without the benefits cruise
control systems provide. WAECO's new cruise control, MagicSpeed
MS 900, takes care of that. It was specifically designed for vehicles
with CAN bus system and electronic accelerator. Magic Speed
MS 900 uses a control unit that is directly linked to the electronic
accelerator control by means of a vehicle-specific adapter cable. The
system’s CAN bus compatibility ensures smooth operation within the
vehicle's electronic system. It also makes for super-fast installation. No
soldering, no crimping, just plug and play!
CAN high
12-volt vehicle electrics
CAN low
The interface where the MS 900 taps the
signal is the onboard computer
Signal tapped with just three
vehicle-specific plug-in connectors
Connection to the accelerator via T-plug Connection of the control element to the
dashboard or steering column
Ease of installation shown on the example of Fiat Ducato
For vehicles with
electronic accelerator
a
nd CAN bus
Designed for specific
vehicles
E
xtremely fast
installation
(0.5 – 1 hour)
WAECO MagicSpeed MS 900 3.06
Preconditions for installation:
12 V vehicles, electronic accelerator, comfort CAN bus
S
cope of delivery:
Electronic module, set of cables, fixing materials, installation and operating instructions
Cruise control for vehicles with comfort CAN bus and electronic accelerator
Control unit to be fitted on the dashboard
› Easy installation on the dashboard
› ON/OFF switch
› Fine speed adjustment (tap up, tap down)
› E-approved
Scope of delivery:
Control element, plug housing, fixing materials, installation instructions
Control lever to be fitted on the steering column
› Easy installation on the steering column (left), inclination variable with angle disks
› ON/OFF switch with status indication fitted on the steering lever
› Fine speed adjustment (tap up, tap down)
› E-approved
Scope of delivery:
Control lever, plug housing, fixing materials, installation instructions
Product Ref. No.
Control element MS-BE5
WAECO MagicSpeed Accessories 3.06
Product Ref. No.
Control lever MS-BE6
Attractive design
in original equipment
quality
Easy installation on the
dashboard
Control elements for MagicSpeed MS 900
› Functions: speed set and previous speed reset
›
Fine speed adjustment (tap up, tap down)
›
After code entry system adjusts itself
a
utomatically to the vehicle parameters
(
speed signal and sensitivity)
› ON/OFF
› All signals required are controlled via
CAN bus system
› Easy to fit with cable sets for specific vehicles,
n
o soldering or crimping – just plug and play
›
Choice of two control elements
›
German and European operating permit
1
h
o
u
r
CAN bus
Brake ClutchSpeed signal
Control unit Accelerator
Product Ref. No.
MagicSpeed MS 900
for Fiat Ducato, Peugeot Boxer and
Citroën Jumper MS-901
MagicSpeed MS 900
f
or Opel Movano/Vivaro, Renault Master/Traffic
and Nissan Primastar/Interstar MS-902
NEW
F
it
te
d
in a
trice!