Operation Manual

EN
Troubleshooting PerfectCharge MCP04/07
40
10 Troubleshooting
!
I
The red LED indicates a fault:
WARNING!
Do not open the device. You risk sustaining an electric shock by
doing this.
NOTE
If you have detailed questions about the battery charger data,
please contact the manufacturer (addresses on the back of the
instruction manual).
LED display Cause Remedy
Flashing Inverse polarity Check the cables and connections.
Flashing Battery voltage < 9 V The battery cannot be charged.
Replace the battery.
Constantly lit Battery no longer
connected
The connection to the battery was
disconnected during the charging
process.
Check the cables and connections.
Fuse in the connection
cable was tripped
Replace the fuse (10 A plug-in fuse
for vehicles)