Operation Manual

EN
Technical description PerfectCharge MCP04/07
34
6.2 Status indications
Meaning of the blue LEDs (mode 1 and 2)
Key to the figure:
Designation Description
Red LED Flashing: The polarity is incorrect, or the battery voltage is
less than 9 V.
Constantly lit: The connection to the battery was discon-
nected during the charging process.
Green LED Constantly lit: Mode 2 or mode 3 is active.
Blue LEDs In mode 1 and mode 2, the LEDs indicate the phase in which
the battery charger is currently operating (see the following
table).
The LEDs flash in succession when the battery charger is
operating in wait mode (the mains voltage is connected but
the battery is not connected).
The LEDs flash simultaneously when the battery charger is
ready for use (mains voltage is connected, battery is con-
nected, button has not been pressed).
LED status Meaning
Off
Flashing
Constant glow
14,4 V
U
t
14,4 V
14,7 V
13,8 V
14,7 V
13 V
14 V
4
3
2
1
123 4567 8