Technical data

Software adjustments
The magic safe MS-650 has a number of software selectable features
These can be changed using the procedure listed below. Some of these
features are to enable the alarm system to be configured to the vehicle
e.g. other switch settings will be determined by customer preference.
Therefore, you should discuss these requirements with the customer
before the vehicle is supplied. Please see the selection list specified
below which gives details of the possible software adjustments. For
programming see Programming.
5858
Button
Software switching function
Works’
adjustment
Blue button Grey
1-1 Self-activation ON/OFF OFF ON OFF
1-2 Alarm duration (30 or 60 sec.) 30 sec. 30 sec. 60 sec.
1-3 Lock with reactivating OFF ON OFF
1-4 Locking / unlocking via the
ignition
ON ON OFF
1-5
Acknowledging tone via siren ON/OFF
ON ON OFF
1-6
Duration of impulse of the door locking
function
0,6 sec. 0,6 sec. 3,5 sec.
2-1 Convenience output active ON ON OFF
2-2
Duration of impulse of the convenience
output
10 sec. 10 sec. 25 sec.
2-3 Alarm delay time after
self-activation
YES YES NO
2-4 Delay time for alarm triggering 10 sec. 10 sec. 20 sec.
2-5 Siren / horn selection horn siren horn
2-6 Reactivate On On Off
3-1 PIN Access 11-99 Digit Code 1&1* 1-9 1-9
3-2 Deletion of the programmed hand
transmitters. The last hand transmit-
ter used remains in operation.
- Activate both at
the same time
Activate both at
the same time
3-3 Setting the work’s adjustment - Activate both at
the same time
Activate both at
the same time
* The default pin code set by the factory is 11.
MS-650.qxd 13/08/03 12:58 Page 58