Specifications

MagicWatch
Manœuvring a van is often difficult just because
obstacles of medium height are barely visible or can-
not be seen by the driver at all. It doesn’t take much
to get a bad dent. No need to suffer that kind of stress:
your MagicWatch parking aid warns you when you are
getting too close to an obstacle while reversing.
With MagicWatch MWE 900 and MWE 910 WAECO offers
two highly reliable systems that have proven their worth
for use in vans. They come with ultra-small sensors (only
18 mm in diameter) and a comprehensive range of
fitting accessories for hassle-free installation even in
difficult or confined spaces. The variable stop line (see
diagram on the right) is yet another bonus that sets these
MagicWatch models apart from other parking aid
systems.
Built to fit
Parking aids for every (mounting) situation
Parking aids:
smart, reliable,
easy to fit
12
/ 24 volts
Variable stop line
The parking aid sensors are located at the rear bumper, but there’s
a tow-bar or step protruding beyond the bumper. No problem,
MagicWatch will take account of such “extras”. Simply shift back the
stop line (by up to 40 cm) and use your parking aid as you normally
would.
Distance of stop line
from step shifted by 20 cm
using the DSM function
Distance of stop line
from sensors
70 cm
50 cm
30 cm
70 cm
50 cm
30 cm
www.dometic-waeco.com Contents, specifications and availability are subject to change serving the technical improvement.
126