Specifications

Cruise controls
WAECO MagicSpeed HUD 3.06
E 9
Luxury-class comfort at the touch of a button – programmed in 5 steps
Stand-by mode
The display is ready for
service as soon as you turn
on the ignition. All indicator
lamps flash for about two
seconds.
Coarse adjustment
Adjust the speed readout
of the display to that of the
speedometer.
To be done in four steps
(10, 20, 40, 80 km/h).
Fine adjustment
Adjust the speed readout of
the display to exactly that
of the speedometer.
To be done in a range from
50 to 250 km/h.
Set warning speed
Set at what speed limit the
display is to emit an audible
warning signal (eight stages,
from 30 to 130 km/h).
Warning tone
Naturally, you can also disable
the warning function.
Head-up display with speed warning function
Safe and convenient:
keep the speed and
the road in view
With speed
warning function
Light sensor
automatically adjusts
LED illumination
Features & functions
› Displays current speed on the windscreen
› Speed warning function (e.g. at 30, 50, 70 or 100 km/h)
› Ease of use with 4 programming buttons
› Non-reflecting, single-coated projection film
› Light sensor automatically adjusts LED illumination (dims in the dark)
› Speaker on top of the housing (warning function can be disabled)
› 12-volt supply via ignition plus
› 3-pole connection cable (ignition, earth, speed signal)
Test mark E-approved to automotive directive
Scope of delivery: display, 3-pole connection cable, projection film, installation fittings,
installation and operating instructions
Contents, specifications and availability are subject to change serving the technical improvement. 136 – 137
Product Ref. No.
MagicSpeed HUD MHUD-100
Optional extras
Signal amplifier MS-SV
CAN bus interface (p. 130) 9101400020
Spare part
Projection film MHUD-100PF